What it does
The app is the Volume Test Record form for fuel dispenser tests, with the optional Wetstock Adjustment Record. You fill it in on site, it checks the readings against the tolerances as you go, and it makes the VTR PDF (and the Wetstock PDF when needed) exactly as the paper form lays them out. Every job you save is also sent to the office automatically.
Search: type a word in the box under the heading (two letters or more) and the guide shows only the parts that mention it, highlighted. Enter or the arrows step through them; Esc shows the whole guide again.
Works with no signal
Once it has been opened online on this iPad, the whole form works underground. Jobs wait and send themselves later.
Sends itself to the office
Save / Send keeps a copy on the iPad and queues it for the office. No emailing PDFs around.
Your AP number
Lives on your login. It pre-fills AP 94 on every form and is recorded against each job.
The home page
The app opens on a home page. If nobody is logged in on the iPad, the login box sits at the top; Log out is in the top bar. Everything else on it works with no signal except the Trading Standards website links.
- Start a VTR form opens a blank form. The Home pill in the form's top bar brings you back, and the form you started is kept: the tile then reads Continue your VTR form, with the site, job number and when it was last changed. Tap it to carry on where you left off. Start a new form instead, under the tile, clears it (it asks first).
- Previous forms is the list of your saved jobs and what the office has received (it used to sit under the form). See Records on this iPad below.
- Letter of Accreditation opens the current letter from Trading Standards, with its date and expiry. It is the proof that we, and you, are accredited. Who is on it? under the tile opens a search: type part of a name or an AP number to see whether that person is on the current letter.
- Verification reports lists the Trading Standards reports for our measures that are still in force, grouped by branch, newest first. Each line shows the measure IDs the report covers. Type a measure ID (from the label on the measure), a report number or a branch in the search box to find the report for it. Open shows the PDF inside the app. Keep offline saves a whole branch's reports on this iPad so they open on the forecourt without signal; the letter is saved for you after you log in.
- Trading Standards website: UTP01 (the driveway flow meter test procedure), TS-005 (which measure size to use at maximum flowrate), TS-006 (when a full verification is required), Non-compliances and the Glossary. These need signal and open in Safari.
- Legislation: the Weights and Measures Act 1987 and the Weights and Measures Regulations 1999, as currently in force on legislation.govt.nz. Need signal.
- Clarksons documents: our Quality Manual System (AR_01), the Driveway Flowmeters (DFM) Class 0.5 and Fixed liquid fuel measuring instruments Class 0.5 documents, and the Wayne Helix 5000 flow-rate adjustment. They open from Clarksons SharePoint, so they need signal and your Microsoft login.
- The version number is at the bottom of the home page. Quote it if you report a problem.
First time on an iPad
- Open the app address in Safari, tap Share, then Add to Home Screen. Use the icon from then on, not Safari.
- Log in on the home page with your email and password. If you were given a 6-digit code instead, tap I have a code, enter it and choose your own password. (The form's top bar also offers Log in if you land there first.)
- Your AP number comes from the office's register and sits beside your name in the top bar. It cannot be changed from the iPad; if it is wrong, tell the office. Log out is on the home page.
- Stop the location prompt. The first time you tap Use current location the iPad asks to allow it. To stop it asking every time, open the app address in Safari, tap the aA at the left of the address bar, choose Website Settings, and set Location to Allow. That is the iPad's own setting, not the app's, and it needs doing once per iPad (and again after the app moves to its new address).
Log in each morning your login has ended. A login on the iPad lasts until midnight at the end of the next day: log in on Monday and it ends at midnight on Tuesday night, so you log in again on Wednesday morning before you start. It never ends part way through a day. If you see Not logged in in the top bar and you have signal, log in again.
Filling in a job
- Work down the form. Fields that need attention turn red; when you Validate, what is missing is listed at the top of the page and again at the bottom.
- Site lists (Mobil). Choose Mobil as the Oil Co and Site Name becomes a search of Mobil's sites: type part of the name, the street or town, or the Mobil site number. Tap a site and the form fills the site name, the address and the site's email. The email goes into the Wetstock Site Email, the client email on every NoNC, and the To line when you email the job. A line under Site Name shows which email was used. Everything filled in can still be changed: an email you have typed yourself is not replaced, and typing over the name takes that site's email back off the email. A site that isn't on the list is typed in as before. The list comes from the spreadsheet Mobil sends each month and stays on the iPad, so it works with no signal.
- Use current location fills the site address from GPS when there is signal. A typed address is given its capitals as you go (and 8B, McLeod, RD 2, PO Box when you leave the box); capitals you type yourself are kept.
- Look up on the TS approvals register, under Certificate No., opens the Trading Standards approvals certificate register in Safari (needs signal). Search by make, model or certificate number there, copy what you need, then swipe back to the app and paste it in. The form keeps everything you had typed.
- Choose from the register's reports, beside the verification report number, opens the reports the office holds. Search by report or measure number and tick the ones you use; expired reports that have been replaced are hidden, and a report with no newer one shows EXPIRED in red and can't be picked. View opens the report itself. The measures you pick (or type) also fill the test measure numbers on the Wetstock and Flowmeter sheets.
- Comment (optional), under the verification report number: a short note such as New pumps or Training. It prints at the top right of the VTR, above the verification report box, and shows in the Office view. A long comment wraps onto two lines.
- The nameplate photo is required and travels inside the VTR PDF.
- Is this dispenser new, or new to this site? (under the Minimum delivery labels) must be answered. Yes means it has no current Mark of Verification or Certificate of Accuracy: Current MoV and Current CoA are set to No on every line and locked, and every Pass is a Verification (Certification is not available). No changes nothing.
- Add a pump line per dispenser side. Tolerances colour the readings: green is within tolerance, amber is in between, and a red ring means outside the national tolerance, which fails the line.
- Continuing a test onto the next line (tick Continue this test into another line): the next line takes the starting totaliser, Location, Test volume, Product grade, Current MoV and CoA, their AP numbers and the CoA expiry from the line before, locked and outlined amber. That carries on through as many continued lines as the test runs, and later changes on the first line follow through.
- High flow test? On a dual-rate dispenser (a Maximum flowrate like 40/70), an ADO line asks whether this is the high-flow test. Yes with a 20L test measure sets the 5L test and the Slow to N/A for you.
- N/A set for you can be unticked. The 5L test is ticked N/A for you on a 200L or 220L test, and the 5L test and Slow on a high-flow 20L test. If you did that pour, untick N/A and enter it: it then counts in the throughput check, asks about wetting the 5 L measure, and the Wetstock and Flowmeter sheets ask for the 5 L measure number. Once unticked it stays unticked.
- High flow and dual totes. A diesel (ADO) line is high flow when the dispenser's Maximum flowrate is above 71 L/min: a single rate such as 120, or a dual rate whose high figure is above 71 with High flow test? answered Yes (40/70 is semi-high flow, so it isn't). A high-flow line asks Dual totes? (two meters). Some high-flow dispensers pour through two meters at once, each with its own totaliser. Answer Yes and the line adds Meter 2 totaliser before test and Meter 2 totaliser after test, and the line's own totaliser boxes are relabelled Meter 1: read both meters at the start and at the end. Throughput is both meters together (for example 437.82 L + 457.14 L = 894.96 L), and the throughput check against what was poured uses that total. Continuing the test into another line carries Meter 2 across too. On the VTR and the Flowmeter Test Sheet, Meter 2 prints on its own row under the line, as on the paper VTR: same pump and grade, its two totalisers and dashes everywhere else, with the combined throughput on the line's first row. The Wetstock shows each meter's own difference. A dual-totes line takes two of the sheet's 10 rows, so + Add pump line stops when the rows are full.
- Have you had to break or apply any seals? Each line asks this after Throughput, before the Result. Yes: the line cannot be certified, so a Pass is a Verification. No: a Pass is a Certification, unless the dispenser is new (then it stays a Verification). The answer shows on the form and to the office; it is not printed on the PDF.
- Wetting the measures. Before the test pours, each line asks about every measure it uses (the 5 L measure when the 5L test is done, and the 20, 200 or 220 L test measure): I have wet the measure as per the requirements or The measure remained conditioned from the previous pour. Wet means filled to capacity and drained: 30 seconds for a measure of 50 L or less, 60 seconds above that, and the same drain time between pours. Remained conditioned can't be chosen the first time a measure is used on the job, or when it was last used for a different fuel type. The one exception is a second sheet on the same job: if a VTR with the same job number was saved on this iPad in the last 10 minutes, and that measure's last pour there was the same fuel type, its first use on the new sheet may be remained conditioned (the line says so). All petrols (91, 95, 98 and the blends) are one fuel type; ADO, Avgas, JetA1 and Adblue are each their own. The same 10 minutes apply between lines, and they start when the earlier line's Totaliser after test is entered: a measure used on a line that finished more than 10 minutes before this line's first pour with it must be wet again. Until that line's Totaliser after test is in, the clock hasn't started. The app notes the times, so the line tells you how long it has been. A continued line is set to remained conditioned for you.
- Mock VTRs (trainees). If the AP register lists you as a trainee (or you are the trainee Management Representative on 94.MR-TR), you cannot sign the form off: both signature boxes show MOCK VTR / For training and audit purposes only in red instead of a signature pad, and every PDF is stamped the same way (Mock Wetstock, Mock Flowmeter Test Sheet, Mock NoNC). Nobody signs, the file names and the email subject start with MOCK, and the office sees the job tagged Mock. It is for training and audit, not a valid verification.
- A Fail needs a NoNC unless it is corrected. When a line is ticked Fail and the test is not continued into a retest on another line, a red box under the Result says a NoNC must be raised. The NoNC itself is still written in the carbon book: one copy handed over or attached to the dispenser, one sent to Trading Standards. Tick NoNC, then record it in the box: tick A NoNC has been raised in the carbon book (the date and time fill in, change them if needed), and choose Passed to the manager / site rep (with their name) or Attached to the dispenser. Every NoNC needs a photo of it (the camera button under the NoNC box): of the notice before you hand it over, or of it on the dispenser. The form will not send until that is filled in. It is saved with the job, photo included, and shown to the office; it is not printed on the VTR PDF. To send the client an electronic copy as well, tick Also make the Notice of Non-Compliance, to send to the client and fill in the notice (To, client email, date and time, particulars). The app makes it as a PDF for that line, and the client email is added to the email when the job is sent. The client email is typed once: it fills the other NoNC lines and the Wetstock Site Email, and the Wetstock Site Email fills the NoNCs.
- Throughput check. The totalisers must have moved at least as much as was poured: 5L test, Slow, Fast (1) and Fast (2) on the line (across all the lines of a continued test), plus the volume of each measure you wet. If they show less, the Totaliser after test turns red and the line says how much was poured, as you type it. A blended 95 draws from two tanks, so each totaliser only needs its share: the 95 (98) line at least 70% of what was poured on it, and its Blended 95 (91) line at least 30% of the pours on that 98 line. The two together must also give a Blend % of 70–75% (the share of 98). Pours that weren't recorded move both totalisers together and keep the split, but extra litres on only one totaliser (say 100 L more on the 91) push it outside, and the 91 line's Throughput turns red and says so.
- Throughput maximum. To catch an extra digit, the totalisers can't have moved more than the test could use: a 20 L line at most 200 L (180 L if every measure remained conditioned), a 200 or 220 L line at most 1600 L (1400 L if conditioned). Over that, the Totaliser after test turns red.
- A Mark of Verification for each meter. A blended 95 and a dual-totes diesel line run through two meters, and each has its own MoV. The 95 (98) line records the 98 meter's Current MoV and MoV AP No., and the 95 (91) line records the 91 meter's own (no longer copied from the 98 line). A dual-totes line has Meter 2 Current MoV and Meter 2 MoV AP No. beside Meter 1's. Each prints on its own row of the VTR. The CoA and the checks stay with the first line.
- Blended 95. The 95 (98) line's totaliser boxes read 95 (98) totaliser before / after test, and it has a 95 (91) totaliser before test box beside its own start totaliser: read both at the start. The Blended 95 (91) line then needs only its end totaliser; its totaliser boxes are outlined red until filled. On the PDF the 91 line shows dashes for everything except the totalisers, throughput and the result, and the result marks print on both lines.
- Both signatures are needed unless the site is unmanned. Is this an unmanned site? is asked under the Address; ticking it swaps the Proprietor / Manager signature for an UNMANNED box, and a NoNC is then stuck to the dispenser / pump.
- The form keeps itself. Everything you enter is kept on the iPad as you go, so going Home to read a regulation, switching apps or the iPad going to sleep loses nothing. When you come back, a bar at the top says Picked up the form you started; tap OK to carry on, or Start a new form instead. Once the job is saved and sent, the kept copy is cleared.
- Flowmeter Test Sheet. Switch on Generate a Flowmeter Test Sheet for this job? and the sheet is filled from the job: date, client, job number, site and every pump line's readings. A line adjusted and continued into another shows "Calibration"; a blended 95 shows as 95 (98) and 95 (91), with dashes for the 91 line's pours, and its Blend Ratio is the share of 98 in the blend (for example 70.5%). Give the test measure numbers if they are not already filled from the reports you picked.
- Wetstock Adjustment Record. Its pump lines come from the VTR. Blend % on a 95 (98) row is the share of 98 in the blend: the 95 (98) throughput divided by the 95 (98) and 95 (91) throughputs together (47.58 L and 19.92 L make 70.5%). Calibration required? follows the line's seals question: seals broken or applied makes it Yes, none makes it No, and it is locked; until the seals question is answered you choose. A Blended 95 (91) row follows its 95 (98) row. The Site Email and the NoNC client email fill each other.
- Save / Send saves the whole job and makes its PDFs: the VTR, and the Wetstock as well when the Wetstock section is switched on (the button then reads Save / Send VTR + Wetstock). Both are saved every time. With two forms you then tick which to send: both, or just one; Not now sends nothing and leaves them under Previous forms to send later. Pressing Save / Send again without changing anything sends the same PDFs, not new ones. It will not save or send while anything on the form is still unanswered: fix the list first (it is at the top of the page and again at the bottom). A Fail is not a gap. A reading out of tolerance or a flowrate over the certificate sets the line to Fail and is listed under "Results recorded on this form", and the form still sends once every box is filled (including NoNC or Continue on the failed line).
Emailing the PDFs
When you tap Save / Send with signal, an email box opens: the subject is set for you (the job's name and date), the office address is already filled in, you can add the site's address or a note, and when the job has both forms you tick which to attach. The email goes from the Clarksons VTR mailbox with the PDFs attached, and a copy sits in that mailbox's Sent Items. Records already saved can be emailed again from the records list with Resend…. Any NoNC or Flowmeter Test Sheet made for the job is in the attach list too, and a NoNC's client email is added to the To line, as is the email of a site picked from the Mobil list. With no signal, or if email is not set up, the iPad's share sheet opens instead as before.
Trial mode (on until the app is approved): the email goes only to Clarksons addresses. Any site, oil company or NoNC client address in the box is left off, the email box says so before you send, and the message after sending lists who was left off. The paper VTR stays the record for the customer.
Records on this iPad
Open Previous forms on the home page. Every job you save is listed with what the office has. The list shows only your own jobs: on a shared iPad each technician sees their own records after logging in, and nothing is listed when nobody is logged in. Waiting records are sent under the login that saved them.
| Badge | Meaning |
|---|---|
| Sent | The office has this version of the job, PDFs included. |
| Waiting | Saved on the iPad, not yet sent. It goes by itself when the iPad has signal, or tap Send waiting records now. |
| Not sent | The server refused it. Tap the badge to see why, then try again or tell the office. |
- Open VTR / Open Wetstock show the PDF inside the app with a Close button, so there is no tab to find your way back from. The PDF links in the office list below work the same way.
- Reopen form (administrators only) opens a copy of a saved job as a new form. The record already sent to the office stays exactly as it is; saving the copy makes a new record. Technicians do not see it: a sent record is not re-edited.
- Keep stops a record being tidied off the iPad after 30 days. The office copy is never tidied.
- Delete removes it from this iPad only. The office copy is not touched.
A sent job cannot be changed. Once the office has the PDF, the server will not take an altered copy of that record. If you spot a mistake after sending, start a new form and send that; the original stays as it was sent. The list marks such a record Already sent · changes refused rather than "Not sent".
Below that, Your records in the office lists your own jobs from the last 30 days as the server received them, with the PDFs the office holds. It is read-only for everyone, administrators included: an office copy can never be removed from the iPad. If one should not be there, tell the office; an administrator removes it on the Office page. Older jobs stay in the office; they just drop off this list.
Questions and warnings (Start a new form?, Delete this record?, Not ready to send, and so on) appear in a Clarksons box with a dark header. The red button does what it says; Cancel, Keep this form or a tap outside the box leaves everything as it was.
For the office (administrators)
Administrators have an Office page (the Office pill in the top bar, or office.html) with these tabs:
- Trial mode, at the top of Records: while it is ticked, every job email (from an iPad or from here) goes only to clarksons.co.nz addresses and the client is left off. It is on until the app is approved; switching it off asks first, and both changes are in the Audit log.
- Records: the tiles at the top count the jobs on the server, those received this week, those with AP check flags, and how many APs have sent jobs (APs with submissions). Below them, every job from every technician, filters by technician (the AP list shows name and AP number), date and site, the PDFs, and View form to read the whole saved form without opening a PDF. This is the only place an office copy can be removed; the technician's iPad keeps its own copy. Jobs whose AP 94 box does not match the technician's registered number, or holds a number that is unknown or on hold, carry an AP check flag. Download Excel saves the jobs the filters show as a spreadsheet: date, job, site, AP, the forms, Lines failed (failed pump lines on the VTR, a Blended 95 counted once), Failed lines with NoNC (how many of those had a NoNC), the AP check, when it was received and who it was emailed to. Monthly email, beside it, emails two spreadsheets at 7am on the 1st of each month: last month's VTR jobs (the same columns, every technician, by job date) and the measures snapshot from the Trading Standards Register. Tick Send it automatically to switch it on (it is off until then), set who it goes to, and Save. Send it now sends it straight away to the saved address, which is a good way to check it. If the register can't be reached, the VTR jobs still go and the email says the snapshot is missing. Every send is in the Audit log.
- Users: the Trading Standards AP register decides who may use the app. Add technicians from the AP register adds a login for every active AP on the register in one go, with no codes; the list then shows each person as no code issued, code sent or password set, with a Send invite button beside each. AP numbers are never set here, and nobody is deactivated or removed here: when a number goes on hold, is retired or leaves the register, that login is switched off within five minutes (and drops off the list while on hold), and it comes back by itself when the register says so. The office can still change roles and reset passwords. Trainee status comes only from the AP register: anyone it lists as a trainee is marked Trainee here and their forms are training forms; untick Trainee on the register once they are accredited. Make admin shows a warning first: an administrator sees every job from every technician, can email records, invite logins, reset passwords and make other administrators, so give it only to people who run the office side. Administrators of the AP register log in here with their register password; the first time, their login is created automatically.
- Audit log: who did what and when, like the Sign-in app's: logins (and failed logins), records sent, viewed, opened as PDF, emailed or removed, logins added, invited or changed, and what the AP register switched on or off. Search by person, action, site or job; filter by date. Kept for two years, then deleted.
- Links: the same Trading Standards website, legislation and Clarksons SharePoint links as the iPad home page, each opening in a new tab. The SharePoint documents need your Clarksons Microsoft sign-in.
- Site lists: the oil company's monthly site list, uploaded here so the iPads can search it. See Uploading the monthly site list below.
- AP numbers: the AP register as this app sees it, which numbers are active, trainee or on hold (and until when), and which login has claimed each one.
- 30-day report: every active AP with no VTR received in the last 30 days goes to the Management Representatives (trainees and Management Representatives are left out). It is run from the Trading Standards Register: AP Register page, VTR 30-day report.
An AP number can only be claimed by the person the register lists for it, with the same email, and only once. A number on hold after someone leaves cannot be used by anyone for 53 weeks. MoV and CoA AP numbers on the pump lines are not checked; they can be any AP's.
Changes made on the AP register reach this app's server within five minutes. An iPad picks them up the next time the form is opened or someone logs in, which is fine because AP numbers do not change that fast, and the server checks every job again when it arrives.
Uploading the monthly site list
Mobil sends a spreadsheet of its sites each month (NZ Site, SP and SPOC listings.xlsx). Uploading it keeps the iPads' Site Name search up to date: the site names, addresses and emails the technicians pick from. Only Mobil's list is set up so far.
- Save the spreadsheet from Mobil's email to your computer. Upload it as it came: it can be opened, but don't move the tabs or the columns.
- On the Office page, open the Site lists tab and tap Upload this month's Mobil spreadsheet.
- Choose the file. A box confirms it, for example 113 Mobil sites loaded from Sites@01102026, and says how many sites have no email on the list.
- Check the table: search for a site or two you know and see that the address and email look right. A site marked No email has none on Mobil's list, so the technician types it in on the form.
- That's it. Each iPad picks up the new list the next time the form is opened with signal. The technicians don't need to do anything. A form already started keeps what was filled in, and jobs already sent don't change.
What is read. Only the first tab (Sites@ and the date): the site name from column J, the address from column M with the town from N, and the email from column Y. Everything else in the workbook is ignored. The list starts under the heading row (Service Station Name … E-Mail Address) and stops at the Old sites rows at the bottom of the tab, which are never imported. The names and addresses are tidied for the form: MOBIL EXPRESS PUKEKOHE becomes Mobil Express Pukekohe, and NZ/400136 - MOBIL AMBERLEY, (91 CARTERS RD), NEW ZEALAND with Amberley in column N becomes 91 Carters Rd, Amberley. When a site's email cell hands over from one address to another (old@… until 1/09/2026, new@… effective 1 September 2026), the address that applies on the day of the upload is used. If a site is listed twice, the lower row is kept.
Each upload replaces the whole list. Sites Mobil has added appear, sites it has dropped disappear, and changed emails are updated. The card shows how many sites there are, who uploaded the list, when, from which file and which tab.
Remove the list takes it off the iPads (they go back to typing the site in) until a list is uploaded again. Every upload and removal is recorded in the Audit log with who did it.
Larger text
Tap Larger text in the top bar of the home page or the form and everything steps up a size. Tap it again (Normal text) to go back. The iPad remembers the choice.
Staying logged in
On an iPad a login ends at midnight (New Zealand time) at the end of the day after you logged in, however much it is used, so it never ends during a working day: log in on Monday, log in again on Wednesday morning. On an office PC or Mac a login ends after 15 minutes without use: a minute before, a bar at the top of the Office page warns you, with a Stay logged in button, and after it you are logged out and see a note saying why. An administrator on an iPad is not logged out mid-job: after 15 minutes without use the login carries on as a technician's (fill in and send forms, your own records, reports), and the administrator parts (Reopen form, the Office page) ask you to log in again. A deactivated login or a password change ends it at once. The form itself keeps working offline in the meantime, and jobs saved while logged out wait on the iPad and send as soon as you log in.
Where the data lives
On the server, in one database file plus the PDF files, backed up nightly. The iPad keeps its own copies for 30 days (longer if marked Keep). See the handover notes in the code folder for how to restore or move it.